Thompson Metals & Tubing  

Metal Rolling

    Products | Services | About TMT | Contact/Directions | FAQ | News
Home
<< Back

Services
Laser Cutting
Plasma Cutting
OXY Fuel Cutting
Stress Relieving
Blanchard Grinding
Saw Cutting
Punching
Plate Beveling
Grit Blasting
Bending-Press Brake
Shearing
Flattening
Rolling
Deburring




Phone: 800-755-2875 / Phone: 513-874-1400 / Fax: 513-874-1407

Cylindrical Rolling for Shaping Metal

TMT offers a initial pinch rolling services for our customers. Please call for additional information.

Shaping Metal Using Cylindrical Rolling



Shaping metal using cylindrical rolling has been round for a long time. It works by feeding metal through a series of offset rollers. Then pressure is applied as the metal is fed through the cylindrical rollers. The pressure applied causes the sheet of metal to curial. To increase the angle of the bend, you increase the offset of the rollers. The beauty of cylindrical roller is that they can be use to bend a number of flat metals like: sheets, plates, and flat round stock. Using concaved rollers with a shape rolling allows you to bend round shaped metals like: tubing, pipe, drill rod, and threaded rod.



 

Products | Services | About TMT | News | Contact/Directions | FAQ
Links | Literature | Sitemap | Resources | Privacy

Copyright 1999-2011 Thompson Metals & Tubing All Rights Reserved.